The NCT forestry team hosted two field days for small-scale growers in the KZN midlands at their Glenside and Ahrens depots in March.
These depots play a crucial role in the timber business of the small-scale growers as they are located close to the growing areas thus requiring a relatively short haul from field to depot. The NCT team weighs the in-coming timber, schedules the payment to the grower and arranges the long haul transport from the depot to the NCT chipping facility at Richards Bay.
The purpose of these field days is to familiarise the growers with the timber specs required, to provide the latest info about different aspects of planting, tending and harvesting, and to encourage the growers to network among themselves and interact with the NCT team.
NCT forester Eric Msomi explained the most common timber defects that the depot will not accept. These include:-
• Undersized (less than 50 mm diameter) and oversized (more than 500 mm diameter) timber
• Wrong length - the depot requires 2.4 metre lengths
• Crooked and bent timber
• Timber that has been poorly de-branched or de-barked
• Burnt timber and timber that has started decomposing
• Timber that is contaminated with stones, rubble, metal or other debris
• Timber too fresh – ideally timber should be delivered to depot from around three weeks after harvesting.
One grower raised the issue of timber theft and wondered why he can’t deliver his harvested timber to the depot immediately after harvesting, as the longer it lies around in the plantation the greater is the risk of it being stolen. Eric explained that freshly cut timber is too wet to handle, and also because NCT sells its wood chips as bone dry tons and so it must be weighed at least three weeks after harvesting when the moisture content is sufficiently reduced.
It was suggested that growers could mark their timber with a green dye after harvesting so that it can be identified as belonging to an NCT member, which may discourage the timber thieves.
Another issue that came up for discussion at the Ahrens depot field day was the challenges that growers face of getting their timber to the depot. It seems that there is a shortage of reliable transport available for the small-scale growers in these tribal areas to haul their timber from field to depot. This has been an on-going problem as the loads are often quite small and the growers don’t have suitable transport of their own, so they are reliant upon informal, local transporters when available.
Eric also explained to the growers the importance of accurate record keeping in order to verify the origin of all timber delivered to the depot. He explained that the timber is sold as ‘Controlled Wood’ and so the ‘Chain of Custody’ – the timber’s journey from plantation to market - has to be tracked and verified as legal and proper.
The STIHL SA team were on hand to demonstrate the use of their range of equipment designed to improve the productivity of small-scale timber growers and farmers. These included the following:-
• WP230 water pump – easy to move around by hand, ideal for pumping water into an irrigation ditch or water tank, moves up to 250 litres per minute.
• BT230 Earth Auger – drills perfect holes in the ground for building or fence poles and is ideal for creating uniform pits for planting.
• SG230 Sprayer – delivers powerful spray capacity ideal for plantations or small farms.
• MS260 Chainsaw … this little baby is designed for felling, de-branching and cross-cutting small timber. It’s light, powerful and reliable.
All of this equipment is available at STIHL dealerships around the country.
The Eradispray team, based in Pietermaritzburg, demonstrated the use of their Faka-Plenty hand-operated tree seedling tube planter as well as various tools for doing chemical sprays before and after planting to eliminate weeds. These sprayers are attached to special backpacks that are designed for comfort and meet Mondi’s health and safety requirements for contractors working on their plantations.
The tree farmers supplying both if these depots are primarily growing wattle timber which is in big demand among NCT customers around the world. Wattle timber is also used extensively by the local people as building poles and for fences etc. The farmers in this region are also fortunate in that they can sell fresh wattle bark to the bark factories operating close by, which provides them with additional revenue at harvest time.